FONT SIZE

Proudly serving Southwestern Ontario for over 25 years!

Spray Foam Insulation

Our polyurethane spray foam forms a better seal in your attic, walls, and basement, increasing the efficiency of your heating and cooling systems by preventing any leakage. This means the air you’ve paid for stays inside – and the weather stays out. In addition, our spray foam insulation will increase the value and structural integrity of your home, making it an investment that pays big dividends over time.

Blown Attic Insulation

If your power bills are unusually high, or you’ve noticed your home getting drafty in spots, then air leakage in your walls and attic may be to blame. In that case, blown insulation is a very cost-effective solution to the problem.

Insulation Removal

While attic insulation is easy to “set and forget,” there are times when insulation removal is needed, whether it be for renovating purposes, or to simply maintain a comfortable and safe home. At Insta-Insulation, we’ll assess your insulation situation to determine if insulation removal is needed.

Insta-Panels

INSTA-PANELS® are insulated R-11 foam panels made of rigid polyurethane foam, covered in steel or fiberglass on both sides. INSTA-PANELS® are designed to be used as affordable and durable slab insulation and have all the benefits of regular sprayed-on polyurethane foam but in a clean and portable solution.

"Whenever I need insulation work done on my shows or for my construction company, it’s Insta I call." ~ Bryan Baeumler

Who opens soffits to make sure I have proper attic ventilation?

Related to: Attic Insulation

Insta Insulation’s trained technical sales staff can recommend what is required to make sure you have the proper attic ventilation. Although roof vents are normally in place, they are not effective if they have no fresh air source to draw from. Many homes that are pre 1980 and even some in the early 80’s have aluminum soffit that has perforations so you’d think the soffit are venting. Unfortunately when the aluminum was installed the plywood in the existing soffit was not removed or the holes were not cut big enough to allow for proper air intake.